Wavlink router is a device that provides WiFi signals in all directions of your house. You can quickly pair the Wavlink WiFi router device with the modem. But before paired you will need to do the Wavlink router login process. Now, without wasting crucial time, let’s begin the Wavlink router setup process.
Access The Wavlink Router Login Page
To access the login page of the Wavlink WiFi router, you will be required to take a few things first. Without taking those things you can’t do the further process.
-
Must have a computer or laptop.
-
WiFi devices support the latest version of browser or navigation.
-
Keep in mind the Wavlink default web address and login credentials.
Now, start the login process.
-
Place the Wavlink router gadget power plug in a socket.
-
After that, go to the WiFi setting of the computer and tap on the Wavlink default network.
-
By doing this, the computer automatically connects with the router’s default network.
-
Next, open Chrome on a connected device and enter wifi.wavlink.com in the URL bar.
-
The Wavlink web management page comes on the computer dashboard.
-
Fill in all the details such as username and password which are shown on the display page.
-
At the last step, hit on the login option to complete the Wavlink WiFi router login process.
Setup Wavlink Router
To set up the router, follow the lower steps.
-
Initially, turn on the modem and the Wavlink router.
-
After that, use an ethernet wire to connect the router to the modem.
-
Next, connect the computer to the Router LAN port by network cable.
-
Now, launch navigation and type wifi.wavlink.com in the address bar.
-
From there select the WAN connection type option.
-
Further, choose the DHCP or dynamic IP option.
-
In the end, try to follow all the directions that are shown on the computer dashboard.
After doing the Wavlink router setup process with a modem, if you face any problems then try the lower troubleshooting tips.
Update Software Of Wavlink Router
Initially, open the Wavlink web management page on the computer. After that, look for the network administrator and then click on a software upgrade. Now, install the file on the computer. In the end, restart the Wavlink router to complete the software installation process.
Swap Position Of The Router
By swapping the position of the Wavlink router you can quickly fix any issue. The central location of the office and house is best for settling the router. Make sure that near to metal or electronic appliances don’t place the router. Because the metal type of appliances absorbs all the WiFi signals from the router.
Power Cycle Router
To begin with, press the power button of the router power button to power it off. Now, from the socket take out the router power plug. Next, wait and place the router power plug in the socket. In the end, push the router power button again to turn it on.
Reset All Router Configuration Settings
First, take the hairpin and insert it in the reset hole button of the router. Now, all the router LEDs will be turned off. Therefore, it means the router is completely reset now.
Note: After resetting all the previous configuration settings, you must do the login and setup process again for the Wavlink router.
Tip: If you want to increase the range of the Wavlink router WiFi signal then try the below method process step.
Setting Up Wavlink Extender
There are two easy ways to do the Wavlink extender setup process.
By Pressing The Wavlink Extender WPS Button
Note: If you are trying to do the WPS method process then make sure that your router must support or have the WPS button.
Initially, locate the Wavlink extender device close to the main router. After that, push both the Wavlink extender and the main router WPS button. Now, the WPS button of both the units starts flashing solid blue. Thus it means the extender and router are successfully paired with each other. In the end, locate the router in that area where you are facing slow internet speed. Extender is also called by many other names such as booster, repeater, etc.
After the whole study of this page, without getting help from a technician you can quickly do the Wavlink router setup process. You can also extend the range of router WiFi signals by installing the extender at home. If you want to get more information regarding extenders then contact our tech experts who give guidance for Wavlink.
